Need help?Do you have a question about the Traxxas Velineon 3350 and is the answer not in the manual?
General| Brand | Traxxas |
|---|---|
| Model | Velineon 3350 |
| Category | Controller |
| Language | English |
Contact details and resources for technical assistance and customer service for the Velineon system.
Crucial safety advice for the VXL-3s Electronic Speed Control, covering water, heat, and wiring.
Essential safety measures for handling, charging, and storing batteries to ensure safe operation.
Specific safety precautions and warnings related to the use of Lithium Polymer (LiPo) batteries.
An overview of the advantages and performance benefits offered by the Velineon Brushless Power System.
Illustrates and labels the key parts of the VXL-3s Electronic Speed Control and the Velineon 3500 brushless motor.
Defines key terms like Brushless Motor, Cogging, Current, ESC, kV Rating, LiPo, and mAh used in the manual.
Defines terms such as NiMH, Resistance, Rotor, Sensored, Sensorless, Solder Tabs, Thermal Protection, and Voltage.
Detailed technical specifications for the VXL-3s ESC and Velineon 3500 motor, including profiles.
Lists recommended vehicle component upgrades and steps for removing the existing XL-5 system.
Detailed step-by-step instructions for installing the VXL-3s ESC and Velineon motor onto the vehicle chassis.
Guidance for installing the Velineon system in different models and tips on temperature management with fans.
Details on the Traxxas High-Current Connector and its importance for system performance.
Illustrates the correct wiring connections between the VXL-3s ESC, motor, receiver, servo, and battery.
Instructions for configuring Traxxas TQ radio systems for optimal performance with the VXL-3s.
General guidance for setting up aftermarket transmitters with the VXL-3s, referring to their manuals.
Information on VXL-3s compatibility with various aftermarket receivers and necessary modifications.
Explains the VXL-3s Low-Voltage Detection feature, how to verify it's on, and how to turn it off for NiMH batteries.
Step-by-step guide to enable Low-Voltage Detection for LiPo batteries and the calibration process for ESC and transmitter.
Detailed procedure for calibrating the VXL-3s ESC with the transmitter, including programming steps.
Describes the different operating profiles (Sport, Race, Training) available for the VXL-3s speed control.
Instructions on how to select and verify the VXL-3s Sport Mode (Profile #1) for forward, brake, and reverse operation.
Guide to select the VXL-3s Training Mode (Profile #3), offering reduced forward and reverse throttle.
Instructions for selecting the VXL-3s Race Mode (Profile #2), which disables reverse for competitive use.
Explains the meaning of VXL-3s LED indicators and describes various protection modes like thermal and low-voltage shutdown.
Outlines recommended NiMH battery requirements and compatibility for various gear combinations based on vehicle model.
Details the VXL-3s compatibility with sensored brushless and brushed motors, including wiring and protection features.
Explains the use of sensorless brushless motors with the VXL-3s, focusing on wiring and rotation direction.
Addresses common problems like motor not running, running backward, or immediate motor activation after battery connection.
Solutions for issues preventing programming mode entry and troubleshooting receiver glitches or throttle stutters.
Troubleshooting slow acceleration, steering servo problems, and models not engaging reverse.
To Next Page
