Need help?Do you have a question about the Traynor CUSTOM SPECIAL 50 and is the answer not in the manual?
Essential safety guidelines to prevent electric shock, fire, and other hazards.
Instructions for safe use of the power cord, plug, and grounding.
Guidance on servicing, cleaning, and proper operation.
An introduction to the Traynor Custom Special series amplifiers and their design.
Highlights of the amplifier's design, construction, and capabilities.
Adjusting gain, volume, and using the boost function for Channel 1.
Using tone controls, voicing switches, reverb, and effects on Channel 1.
Utilizing Brightness, voicing switches, and expander for clean tones.
Shaping clean tones and controlling reverb and external effects.
Adjusting brightness, bass response, and amplifier voicing.
Setting overall volume and using the standby function.
Selecting power modes and using the XLR direct output.
Connecting external effects and using amp in/out jacks.
Connecting footswitches and external speaker cabinets.
Managing gain stages to avoid feedback and oscillations.
Controlling reverb levels to prevent feedback issues.
Detailed description of all controls for Channel 1.
Detailed description of all controls for Channel 2.
Overview of master section and rear panel switches and jacks.
Schematic representation of the amplifier's signal path and circuitry.
Details of tube layouts for YCS50H, YCS50, and YCS90 models.
Information on the transferable two-year warranty and coverage.
Details on what is not covered by the warranty.
General| Power Output | 50 Watts |
|---|---|
| Preamp Tubes | 3 x 12AX7 |
| Power Tubes | 2 x EL34 |
| Dimensions | 22.5" x 20.5" x 10.5" |
| Weight | 45 lbs |
| Effects | Spring Reverb |
| Channels | 2 |
| Outputs | 1 x 1/4" (Speaker Out) |
| EQ | 3-Band EQ (Bass, Middle, Treble) |
| Type | Tube Guitar Amplifier |
| Speaker | 1x12" Celestion G12T-75 |
| Inputs | 1 x 1/4" (High), 1 x 1/4" (Low) |
To Next Page