Why does my Treasure Cove Hobbyist TC-1006 Metal Detector display false signals?
If your Treasure Cove Metal Detector is giving false signals, it could be due to sweeping the search coil too fast or at an incorrect angle. Try sweeping the coil more slowly and ensure you are holding the detector correctly. Also, heavily oxidized metals can cause false signals. Attempt pinpointing the target from various angles.
General| Brand | Treasure Cove |
|---|---|
| Model | Hobbyist TC-1006 |
| Category | Metal Detector |
| Language | English |
Lists key features including headphone jack, view meter, waterproof coil, adjustable stem, and power source.
Guide on assembling the detector and adjusting stem length for comfortable use.
Instructions for correctly inserting the battery into the detector compartment.
Steps to turn on the detector using the volume control.
Procedure for tuning the detector to ensure accurate signal detection.
Detailed instructions on how to operate the metal detector for effective searching.
Method for testing the detector's functionality and response in an indoor setting.
Guidelines for testing and operating the detector in outdoor environments.
Tips for proper search coil movement to maximize detection accuracy and avoid false signals.
Explanation of how to use the DISC setting to differentiate between various types of metal.
Step-by-step guide for accurately locating buried targets using specific search patterns.
Solutions for common issues like false signals, incorrect metal identification, and detection failures.
Guidelines for handling, cleaning, and maintaining the metal detector for optimal performance and longevity.
To Next Page
