EasyManua.ls Logo

Treasure Garden AKZ Series - User Manual

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
AKZ/AG28 Series
Canopy Replacement
Assembly and Operation Guide
www.treasuregarden.com
©2017 Treasure Garden, Inc. - All Rights Reserved. Rev. 2/17
Question and Answer IconNeed help?

Do you have a question about the Treasure Garden AKZ Series and is the answer not in the manual?

Summary

AKZ and AG28 Canopy Replacement Guide

Step 1: Initial Preparation

Ensure umbrella is closed. For square/rectangle canopies, remove 8 screws from rib end caps.

Step 2: Canopy Removal Teamwork

Requires a ladder and two people. One secures the ladder, the other ascends to the umbrella top.

Step 3: Removing the Old Canopy

Canopy Removal Procedure

Access velcro/zipper, unzip, and slide canopy off ribs. Descend ladder and continue removal.

Step 4: Installing the New Canopy

Canopy Attachment for Octagon Types

Slide the canopy's top opening over all 8 ribs.

Canopy Attachment for Square;Rectangle Types

Start by sliding canopy over 4 longest ribs, then over the 4 shortest ribs.

Securing Canopy During Installation

A second person supports the canopy to prevent dragging while it's slid up the ribs.

Step 5: Securing Canopy at the Top

Final Canopy Top Securing

Slide canopy under cap, ensure velcro/zipper face back, and secure top.

Step 6: Finalizing Installation

Octagon Canopy Final Ribs

Slide spring-loaded rib ends into canopy pockets.

Square;Rectangle Canopy Final Ribs

Reattach 8 screws to canopy ends and spring-loaded rib end caps.

Treasure Garden AKZ Series Specifications

General IconGeneral
BrandTreasure Garden
ModelAKZ Series
CategoryTent
LanguageEnglish

Related product manuals