TREBLAB HD-Force - Connecting via AUX Mode

To change the track on the HD-Force, press and hold the VOLUME + or the
VOLUME - button for 2 seconds.
AUX MODE
You can connect TREBLAB HD-Force to compatible devices using the supplied
3.5mm AUX cable.
Turn the speaker ON.
@ Plug one end of the supplied 3.5mm AUX cable into the 3.5mm AUX cable port
on the back of the speaker (under the rubber cover). Plug the other end into the
3.5mm jack on your device.
¢ The state indicator will turn GREEN. Now you can play music and audio.
To mute the audio, press the PLAY / PAUSE button.