but also to amplify some frequencies in the Ambient Sound
mode to hear voices when using the Z7 Pro headphones.
When the Z7 Pro are turned on, the ANC mode is enabled
automatically. In the ANC mode the green LED on the right
earcup is lit up. To switch to the Ambient Sound mode, press
the ANC button once. You will hear the “Ambient sound” voice
prompt and the LED on the right earcup will change to white.
To disable both ANC and Ambient Sound modes, press the
ANC button once again. You will hear the “Ambient sound and
noise cancelling off” voice prompt and the white LED light on
the right earcup will go off.
NOTE:
Keep the dedicated ANC microphone holes on both earcups
unblocked when using the ANC/Ambient Sound functions.
AWARENESS MODE
When you listen to music and some person approaches you to
talk, you can fastly lower the music volume to the minimum and
activate the Ambient Sound feature to keep the conversation
going. To do so, cover the right earcup with a palm. Once you re-
lease the earcup, the music will go back to the previous volume
level and the Ambient Sound feature will be disabled.
To Next Page
Loading...
