AUX LINE-IN CONNECTION
You can connect the TREBLAB Z7 Pro to compatible devices
using the supplied 3.5 mm audio cable.
Plug one end of the 3.5 mm audio cable into the AUX LINE-IN
port on the right earphone and plug the other end into the AUX
LINE-IN port on your device.
In the AUX mode, you can also use the ANC/Ambient sound
features + adjust the volume. To do so, turn on the headphones
by pressing and holding the POWER button for 3 sec. Keep in
mind that in such case the inbuilt battery will still be drained.
NOTE:
NEXT, PREVIOUS, PLAY/PAUSE controls are not supported in
the AUX mode. You will need to make these adjustments using
your smart device.
AUDIO PLAYBACK
The TREBLAB Z7 Pro headphones are equipped with a highly
responsive Touch panel on the right earcup.
To pause and resume the playback when connected wirelessly,
double-tap on the Touch panel.
To adjust the volume, swipe up on the Touch panel to raise
the volume and swipe down to lower the volume.
To change tracks on the Z7 Pro headphones, swipe forward on
the Touch panel to play the next track and swipe backward
to play the previous track.
To Next Page
Loading...
