Trebs 21131 - Additional Operation; Moving the Unit; Unit Location; Connecting the Cable

- 38 -
For best results and easy operation:
• Empty the ice bin once the ―ICE FULL‖ indicator is lit, otherwise cubes will slowly melt and slow the
ice-making process.
• DO NOT fill water past the ―FULL‖ level mark as it will cause water overflow.
8. Additional operation
Moving the unit:
When taking out the unit, pay attention the unit can not be sloped over 45 degrees, when moving the unit
without the foam, it is better to grasp the handle grip (see the C picture)
A
B
C
Location:
When starting the machine, it is better to put it in a flat table with a gap of 150mm around(see the below
picture)
≥
150mm
≥
150mm
Connect the cable:
The socket and the plug should be connected tightly. Please unplug the cable when it is not used or
cleaned(see the below picture)