LCT SERIES Operation Manual
15
Rev 3, 5.30.17
Press “CE” key to clear any previous setting, or to cancel the previous unit weight
and sample setting. Select your unit of measure (kg. or lb.), to choose between
these measures press the “sample unit” key.
Place items on the scale.
Key in the average piece weight using the numeric keypad. Then, press “unit
weight” on the keypad.
The total number of pieces will be displayed (more items can be added, if
desired).
Press “sample unit” key and process is complete.
Press M+ if accumulated total is required.
Press “CE” to return to normal operation.
Advanced Piece Counting Functions
Alarm
To avoid counting errors, the weighing scale has a useful alarm function to inform the
user of any counting error in case of a low sample size or weight.
Low sample warning
The low sample indicator on the display will activate if the total weight of the sample is
below the limit value. Press the “CE” key and use a larger sample size (more weight),
key in a sample size on the numeric keypad and press “sample unit”.
Unit Weight Enhancement
The scale will automatically adjust and calculate new average unit weight when more
samples are slowly placed on the scale. This ensures higher accuracy as samples are
now based on larger population size.
Low Piece Weight
The Low Piece Weight indicator will turn on if the averaged unit weight or set unit weight
is not enough for an accurate counting operation. Operator may use the scale even if
the indicator turns on, but counting error might occur.
High / Low check-weighing with counting
THE LCT series has a useful check function to alert the user that the total piece count
quantity is below a pre-set lower limit or has reached a pre-set upper limit. This function
is designed for packing and other applications.
For example, if it is required to count 1000 pieces into each package, the operator can
set the lower limit and the upper limit:
To Next Page
Loading...
