1
WARNING
• You should never attempt to assemble this feeder alone. We recommend having a minimum of at least
two adults for the assembly of this feeder. Failure to follow these instructions may result in serious
injury or death.
• This feeder must be placed on firm and level ground. Before filling the feeder, we recommend installing
ground stakes (not included) through the holes located in the feet.
• Refer to the drawings in this manual for visualization of the assembly process in addition to reading the
instructions.
• Some parts may contain sharp edges. Wear appropriate clothing and gloves during assembly.
• Do not fill feeder under and/or during bad weather such as storms, snow, lightning, or thunderstorms.
Failure to follow these instructions may result in serious injury or death.
• Do not sit or stand on or inside the hopper.
• Do not fill feeder until it is completely assembled and standing up in place.
• Make sure hands and arms are out of the way of the feeder body and lid when filling the feeder. Failure
to follow these instructions may result in serious injury.
• BEFORE STANDING UP THE FEEDER, YOU MUST:
• Check all hardware to be sure it is in place and tightened.
• Check all bolts and nuts to be sure they are secure and tight.
IMPORTANT! The manufacturer of this feeder is not responsible for any inaccurate information you have
received regarding state feeding regulations. Please always keep your information up-to-date
and reliable. Many state laws change and are amended without notice. Always double check your
state and specific county feeding laws regarding the use of feeders.
• Ensure no body parts are exposed to the sliding plate.
DANGER: This device has ample power to sever fingers if proper precautions are not taken to ensure safety.
• Contact your local or state wildlife agency if you have any questions concerning feeding wildlife.
USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR FEEDER.
FAILURE TO ADHERE TO SAFETY WARNING AND GUIDELINES IN THIS MANUAL COULD RESULT
IN BODILY INJURY OR PROPERTY DAMAGE.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
IMPORTANT SAFETY WARNINGS
WE WANT YOU TO ASSEMBLE AND USE YOUR FEEDER AS SAFELY AS POSSIBLE.
THE PURPOSE OF THIS SAFETY ALERT SYMBOL
IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR FEEDER.
WHEN YOU SEE THE SAFETY ALERT SYMBOL, PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS!
READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY
BEFORE ASSEMBLING AND OPERATING YOUR FEEDER.
OM_FDRP600AS.indd 2OM_FDRP600AS.indd 2 3/25/2024 10:03:00 AM3/25/2024 10:03:00 AM
To Next Page
Loading...