TREEPOD STAND INSTRUCTION MANUAL - ENGLISH
INSTALLATION
2. Attach the Quick Link included in the
TreePod package to the sewn loop on
top of the TreePod and the welded ring
at the top of the TreePod Stand. Screw
in the Quick Link gate completely so it
is secure.
3. Secure the TreePod with guy-line(s) tying
to the leg(s) of the TreePod Stand below the
webbing.
NOTE: Amount of guy-lines will depend on
your model of TreePod.
Cabana/Lounger: 1 guy-line
TreePod Hanging Treehouse/TreePod Plus:
3 guy-lines
NOTE: Check the Quick Link and guy-line knots to insure the TreePod is secure in place.
2
3
1. Read fully and follow directions in the TreePod manual to assemble.
To Next Page
Loading...