TREEPOD STAND INSTRUCTION MANUAL - ENGLISH
9. Lay the Ring with Webbing on the ground in the
center of the TreePod Stand and roll the webbing out to
each leg.
9
10. Lift each leg and place the sewn loop of the webbing around the legs at ground level to secure
the TreePod Stand.
WARNING DO NOT REMOVE WEBBING. WEBBING MUST BE ATTACHED TO ALL LEGS AT
ALL TIMES. REMOVAL OF THE WEBBING WILL AFFECT THE INTEGRITY OF THE TREEPOD
STAND AND ITS STABILITY AND WILL VOID THE WARRANTY. DO NOT USE PRODUCT IF
WEBBING IS DAMAGED OR HAS BEEN REMOVED.
10
8. Using at least three people, lift the TreePod Stand and place in the desired location to hang the
TreePod.
To Next Page
Loading...