Need help?Do you have a question about the TREND T18S and is the answer not in the manual?
General| Sandpaper size | 93 x 230 mm |
|---|---|
| Dust Extraction | Yes |
| Variable Speed | No |
| No-load speed | 13000 OPM |
| Sander Type | Orbital |
| Voltage | 220-240V |
Declares compliance with Machinery Directive and relevant standards.
Declares compliance with UK regulations and designated standards.
Defines hazard symbols like Danger, Warning, Caution, and Notice.
Provides overarching safety rules for power tool operation.
Covers safe practices for work area, electrical, and personal conduct.
Advises keeping safety information for future reference.
Instructions for replacing the mains plug on UK/Ireland models.
Guidelines for using extension cables with the charger.
Explains the tool's protection system against overloads and deep discharge.
Recommendations for safe indoor battery charging locations.
Instructions for safely cleaning the battery charger.
Information on battery charge status display and self-discharge.
Guidelines for safely transporting lithium-ion batteries.
Advice on optimal storage conditions for battery packs.
Explanation of pictographs found on chargers and battery packs.
Lists the contents included with the sander purchase.
Explains the pictograms and symbols found on the tool itself.
Procedure for safely removing the battery pack from the tool.
Guidance on choosing appropriate sanding sheets for different materials.
Instructions for attaching sanding sheets to the pad.
How to operate the ON/OFF switch of the sander.
Procedure for fitting the dust bag to the sander.
Procedure for connecting a dust extractor.
Instructions for emptying the dust bag for efficient operation.
Demonstrates the correct and safe way to hold the sander.
Guidance on how to operate the sander for optimal results.
Instructions for cleaning the tool and its parts.
Recommendations for storing the tool after use.
Information on recycling and proper disposal of batteries.
Guidance for households on disposing of electrical products.
Guidance for businesses on disposing of electrical products.
Key safety precautions for using Trend battery chargers.
Instructions for operating the battery charger and LED indicators.
Safety advice for handling and using lithium-ion battery packs.
Warnings regarding fire, burns, and injury from damaged battery packs.
How to check the battery charge level.
Information on how lithium-ion batteries lose charge over time.
Regulations and safety for transporting lithium-ion batteries.
Procedure for safely removing the battery pack from the tool.
Guidance on choosing appropriate sanding sheets for different materials.
Instructions for attaching sanding sheets to the pad.
How to operate the ON/OFF switch of the sander.
Procedure for fitting the dust bag to the sander.
Procedure for connecting a dust extractor.
Instructions for emptying the dust bag for efficient operation.
Demonstrates the correct and safe way to hold the sander.
Guidance on how to operate the sander for optimal results.
Instructions for cleaning the tool and its parts.
Recommendations for storing the tool after use.
Information on recycling and proper disposal of batteries.
Guidance for households on disposing of electrical products.
Guidance for businesses on disposing of electrical products.
To Next Page