5
5. After finish the installation, plugged in the Wireless LAN USB 2.0 Adapter,
you will see Wireless Configuration Utility Country Selector, select the country
where you are using this Wireless device, users are responsible for ensuring that
the channel set configuration is in compliance with the regulatory standards of
these countries.
.
Warning: Be noted that selecting the incorrect region may result in a
violation of applicable law; you will need to select the correct domain.
6. You will see the icon on the Windows task bar when you finish the installation.
When the icon in the toolbar represents in green color, it is properly connected
to the network and if it represents in red color, then it is not connected to the
network.
To Next Page
Loading...
Need help?
General