TRENDnet TE100-PCI - User Manual

Fiber Ethernet Adapter
User’s Guide 1
檔名: pcifxp.doc
原作者: Carrie Chen
列印時間: 1/31/2003 3:06 PM
Preface
This manual describes how to install and use the Fiber Ethernet
Adapter. This Fiber Adapter allows options of different fiber
connections, such as connector types and segment distance.
To get the most out of this manual, you should have an
understanding of Ethernet networking concepts.
In this manual, you will find:
• Introduction on Fiber Adapter
• Product features
• LEDs functions
• Hardware installation
• Software installation
• Specifications

Summary

Preface

Product Overview

Package Contents

List of items included in the product package.

Product Features

Detailed description of the adapter's features and capabilities.

Driver Support

Software Support

Information on available software and diagnostic tools.

LEDS

Hardware Installation

Installing Fiber Adapter into PCI slot

Step-by-step guide for installing the adapter into a PCI slot.

Connecting Remote Wake-Up Cable

Instructions for connecting the optional remote wake-up cable.

Connecting to Your Network

Cabling Requirements

Software Installation

Diagnostic Software

Using the provided software for setup and diagnostics.

About Hardwares Configuration

How to view and change the adapter's hardware settings.

Run Diagnostics

Performing diagnostic tests on the installed adapter.

Loading Network Drivers

Quick List for Supported Network Drivers

A quick reference for network driver paths and files.

Specifications

Ordering Information

TRENDnet TE100-PCI Specifications

General

Device Type	Network Adapter
Interface	PCI
Ports	1
Connector Type	RJ-45
Data Transfer Rate	10/100 Mbps
Data Link Protocol	Ethernet, Fast Ethernet
Compliant Standards	IEEE 802.3, IEEE 802.3u
Compatibility	PC
Bus Type	PCI
LED Indicators	Link/Activity
Type	Ethernet
Cable Type	Category 5
Operating System Support	Windows 98/ME/2000/XP