TRENDnet’s TE100-PCIFX 100Mbps PCI Fiber Optic Adapter
operates in the 32-bit bus master mode, delivering at multi-
megabits per second with little stress on the host’s CPU. It
also supports both half- and full-duplex modes. When
connected to a switch in full-duplex the network speed can be
increased to 200Mbps, making the adapter an ideal NIC for
the high-speed server. The TE100-PCIFX adapter permits the
PC to situate up to 2km away from the connected hub or
switch where cable distance is greater than the standard 100
meters copper wire. TRENDnet’s TE100-PCIFX is the perfect
choice where twisted pair cabling is an issue in the network
environment.
TE100-PCIFX
100Base-FX Fast Ethernet Adapter for PCI
Complies with IEEE 802.3µ 100Base-FX standard
32-bit PCI Bus Master data transfer rate
100Mbps Fast Ethernet connection
Supports half- and full-duplex modes
Supports 2km fiber cable long transfer distance
Auto-assignment of IRQ and I/O address
Easy-to-view diagnostic LEDs
Low network command processing overhead
DEC intelligent Fast Ethernet controller
Supports complete self-configuration and driver support
5 Year Warranty
BENEFITSFEATURES
Performance:
Expandability:
Flexiblility:
Reliability:
Operates in the 32-bit bus master
mode, and transfers data directly
to/from the host’s memory
Standard SC fiber connectors are
used for easy and reliable connection
Supports all major network operating
systems
With 100/200Mbps speeds, our
TE100-PCIFX offers a 5 year warranty
TE100-PCIFX (11-17-2002)
TRENDnet
TRENDware, USA
What's Next in Networking
To Next Page
Need help?
General