10
Troubleshooting
Q1:
A1:
A2:
A3:
My Nintendo Wii does not have an Ethernet port. Can I use this with my Wii?
You will need to install a USB to Ethernet adapter on your Wii. The
TRENDnet TU2-ET100 version 3.0r is compatible with the Wii. Please go to
www.trendnet.com for more information regarding the TU2-ET100.
: My wireless router does not support Wi-Fi Protected Setup (WPS). What
should I do?
Please follow the instructions in section 2.2 Manual Setup if your wireless
router does not support WPS.
: I inserted the User's Guide CD-ROM into my computer's CD-ROM Drive to run
the Setup Wizard, but the installation menu does not appear automatically. What
should I do?
For Windows 2000/XP, if the installation menu does not appear automatically,
click Start, click Run, and type D:\setup.exe where "D" in "D:\setup.exe" is the
letter assigned to your CD-ROM Drive, and then press the ENTER key on your
keyboard. For Windows Vista, if the installation menu does not appear
automatically, click Start, click the Start Search box, and type D:\setup.exe
where "D" in "D:\setup.exe" is the letter assigned to your CD-ROM Drive, and then
press the ENTER key on your keyboard.
I receive an unable to configure error when I go through the wizard. What
should I do?
First, double check that the wireless LED on the TEW-647GA and your
wireless router is lit. Second, power cycle the TEW-647GA and your wireless
router. Unplug the power to the TEW-647GA and your wireless router. Wait 15
seconds, then plug the power to your wireless router back in. Wait 15 seconds,
then plug the TEW-647GA back in. Then go through the wizard again. Third,
factory reset the TEW-647GA and go through the wizard again. To reset the
TEW-647GA, take a pin or paper clip and press the reset button for 15 seconds,
then let go.
Q2
Q3
Q4:
A4:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
