© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-818DRU
41
3. Click on the USB section and click on FTP Server.
4. Review the setting on Samba Server Information section. Click Apply to save settings
• Server Status: Select enable or disable for the feature.
• Language: Select your language.
5. Review the administrator settings required for your FTP server. Click Apply to save
settings
• User Name: Enter the user name to be used to access your files.
• Password: Enter the password for the user name.
5. Review the User Account List section. Click Apply to save settings
• User Name: Enter the user name to be used to access your files.
• Password: Enter the password for the user name.
• Permission: Select the permission you will grant to the user
• Enabled: Click to activate user account.
Properly Eject USB device
Advanced > USB > Eject Device
It is recommended to properly eject your USB device to prevent any file corruption.
1. Log into your router management page (see “
Access your router management page”
on page 17).
2. Click on the Advanced tab.
3. Click on the USB section and click on Eject Device.
4. Review the settings.
To Next Page
