Need help?Do you have a question about the TRENDnet TV-NVR104K and is the answer not in the manual?
Describes the NVR kit's comprehensive video display, storage, and management capabilities.
Information on recording HD video at 30 fps in H.264 compression.
Enables creation of weekly recording schedules for cameras.
Provides instructions for connecting the NVR to the network and cameras.
Details the steps for connecting the NVR to a power source.
Initiates PTZ operations for compatible cameras.
Process for logging into the NVR's management interface.
Procedure for gracefully shutting down the NVR.
Settings related to connecting cameras to the NVR.
Adjusts brightness, contrast, saturation, and hue of video images.
Details advanced zoom, focus, and aperture controls for PTZ cameras.
Defines specific areas on the screen for motion detection.
Defines specific areas on the screen to be masked for privacy.
Defines specific areas on the screen for tamper detection.
General system settings including time, resolution, and operation.
Basic setup for language, resolution, and operation parameters.
Basic network configuration for internet connectivity.
Configures live view buffer size, interface, and audio output.
Sets up the arrangement and sequence of live view camera displays.
Selects types of system exceptions to monitor for notifications.
Procedure to add a new user account with specified level and MAC address.
Procedure to edit existing user account names and passwords.
Defines user permission settings for accessing NVR features.
Instructions for downloading and performing local firmware upgrades.
Monitors network traffic and displays relevant statistics.
Configures Self-Monitoring, Analysis and Reporting Technology tests.
Formats and initializes the hard drive for video recording.
Sets up the weekly recording schedule for video channels.
Adjusts video quality for the main stream recording.
Details on editing holiday names, types, and date ranges for recording.
Guides on backing up and exporting video recordings to USB.
Provides an overview of the video playback screen elements.
Information on default settings and procedures for factory reset.
Step-by-step guide for initial login using Windows.
Starts or stops video recording for selected cameras.
Locates and selects recorded videos for playback.
Enables searching system logs by time range and log type.
Manages up to 16 user accounts for NVR access.
Guides on performing firmware upgrades remotely via FTP.
Configures basic IPv4 and IPv6 network settings for the NVR.
Sets up how motion detection events are triggered and actions taken.
Manages and initiates the hard disk drive remotely.
Describes the NVR kit's comprehensive video display, storage, and management capabilities.
Information on recording HD video at 30 fps in H.264 compression.
Enables creation of weekly recording schedules for cameras.
Provides instructions for connecting the NVR to the network and cameras.
Details the steps for connecting the NVR to a power source.
Initiates PTZ operations for compatible cameras.
Process for logging into the NVR's management interface.
Procedure for gracefully shutting down the NVR.
Settings related to connecting cameras to the NVR.
Adjusts brightness, contrast, saturation, and hue of video images.
Details advanced zoom, focus, and aperture controls for PTZ cameras.
Defines specific areas on the screen for motion detection.
Defines specific areas on the screen to be masked for privacy.
Defines specific areas on the screen for tamper detection.
General system settings including time, resolution, and operation.
Basic setup for language, resolution, and operation parameters.
Basic network configuration for internet connectivity.
Configures live view buffer size, interface, and audio output.
Sets up the arrangement and sequence of live view camera displays.
Selects types of system exceptions to monitor for notifications.
Procedure to add a new user account with specified level and MAC address.
Procedure to edit existing user account names and passwords.
Defines user permission settings for accessing NVR features.
Instructions for downloading and performing local firmware upgrades.
Monitors network traffic and displays relevant statistics.
Configures Self-Monitoring, Analysis and Reporting Technology tests.
Formats and initializes the hard drive for video recording.
Sets up the weekly recording schedule for video channels.
Adjusts video quality for the main stream recording.
Details on editing holiday names, types, and date ranges for recording.
Guides on backing up and exporting video recordings to USB.
Provides an overview of the video playback screen elements.
Information on default settings and procedures for factory reset.
Step-by-step guide for initial login using Windows.
Starts or stops video recording for selected cameras.
Locates and selects recorded videos for playback.
Enables searching system logs by time range and log type.
Manages up to 16 user accounts for NVR access.
Guides on performing firmware upgrades remotely via FTP.
Configures basic IPv4 and IPv6 network settings for the NVR.
Sets up how motion detection events are triggered and actions taken.
Manages and initiates the hard disk drive remotely.
General| USB Ports | 2 x USB 2.0 |
|---|---|
| Operating System | Embedded Linux |
| ONVIF | Yes |
| Compression | H.264 |
| Video Inputs | 4 |
| Video Output | HDMI, VGA |
| Storage Capacity | Up to 6TB (1 x 3.5" SATA HDD) |
| Network Interface | 1x RJ-45 10/100/1000 Mbps |
| Recording Resolution | Up to 1080p |
| Hard Drive Support | 1x 3.5" SATA HDD |
| Resolution | 1080p, 720p |
| Operating Temperature | 0 – 40 °C (32 – 104 °F) |
| Dimensions (inches) | 8.1 x 8.1 x 1.7 |
To Next Page
