Why is my Treo Engineering SSX750.1 Amplifier not switching on?
Your Treo Engineering Amplifier might not be switching on due to several reasons: there may be no power reaching the power wire, so you should repair the power wire or connections; there might be no power to the remote wire when the receiver is on, so check the connections to the radio; or the fuse might be broken, so check the fuse.
What to do if there is no sound in one channel of my Treo Engineering SSX750.1?
If you're experiencing a lack of sound in one channel of your Treo Engineering Amplifier, inspect for a short circuit or an open connection. Additionally, reverse the left and right RCA inputs to see if the issue occurs before the amp. Check the tuner/deck volume level and clean the contacts on the fuse holders.
Why does my Treo Engineering Amplifier turn off at medium or high volume?
Your Treo Engineering Amplifier might be turning off at medium or high volume because of improper speaker impedance. Ensure that the proper speaker impedance recommendations are being observed. Keep in mind that DC resistance and AC impedance may not be the same when checking speaker resistance with an ohmmeter.
General| Brand | Treo Engineering |
|---|---|
| Model | SSX750.1 |
| Category | Amplifier |
| Language | English |
To Next Page