Tres RETRO - User Manual

RETRO-TRES
Ref. 193616401 • ed. 02-2012
T
(ºC)
50
65
80
bar
1
5
barbar
barbar
PURGAR INSTALACIÓN • PURGER L’INSTALLATION • WASSER AUS DEN ROHREN ABLASSEN
DE INSTALLATIE ONTLUCHTEN • SPURGARE L’IMPIANTO • NECHTE Z POTRUBÍ VYTÉCT VEŠKEROU VODU
BLEEDING THE EQUIPMENT • ODPROWADZIĆ WODĘ Z INSTALACJI
PURGAR A INSTALAÇÃO • ПРОМЫВКА СИСТЕМЫ
VALORES DE CONEXIÓN • VALEURS DE BRANCHEMENT • ANSCHLUSSWERTE
WAARDEN VAN DE VERBINDING • VALORI DI CONNESSIONE
• NASTAVENÍ PŘIPOJENÍ
FITTING CONNECTION SPECIFICATIONS • CHARAKTERYSTYKI PODŁĄ CZENIA
CONDIÇÕES DE CONEXÃO • ПРОМЫВКА СИСТЕМЫ
150mm
R.1/2''G.
12

Summary

Connection Specifications and System Flushing

Technical Connection Values

Details connection values including temperature (°C) and pressure (bar) limits for system operation.

System Flushing Procedure

Instructions for bleeding the installation to remove air and water from the system.

Installation Steps

Initial Wall Mounting

Pipe Connection

Valve Assembly

Maintenance and Temperature Calibration

Cleaning Instructions

Temperature Calibration

Details the procedure for calibrating the thermostatic valve to the desired temperature (38°C).

Thermostatic Cartridge Assembly and Maintenance

Thermostatic Cartridge Installation

Shows how to install and maintain the thermostatic cartridge, including lubrication.

Cartridge Lubrication

Illustrates applying grease to the thermostatic cartridge for smooth operation.

Tres RETRO Specifications