Trevi CMP 582 DAB User Manual

10
CMP 582DAB
ENGLISH
4
2. Press / buttons to select unit “Manual tune” shown on the display. Then press
PLAY/PAUSE/SELECT/SCAN button to enter.
3. Use the
/ buttons to select the desired memory location. Then press
PLAY/PAUSE/SELECT/SCAN button to enter.
Note:
“System” in the MENU is used to reset the unit and check the software version.
“Prune” in the MENU is used to clear all the DAB stations memory.
RADIO OPERATION
Listen to FM radio broadcasts. Press the STANDBY/FUNC. button until the display reads FM
and the radio frequency
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
• Tune to a station by rotate the TUNING knob. The station frequency is shown on the display.
AUTO PRESET MEMORY / SCAN To scan for stations within reception range and save
them to preset memory automatically, press and hold the PLAY/PAUSE/SELECT/SCAN button.
After the unit is finished scanning, the unit will automatically tune to preset number 1 (P1).
Use the / buttons to select the desired memory location.
USING THE CD/MP3
Discs for Playback
This system can playback all digital audio CD/MP3/WMA discs, finalized digital audio
CD-Recordable (CD-R) discs and finalized digital audio CD-Rewritable (CD-RW) discs.
LOADING A DISC
1. Select the CD mode with STANDBY/FUNC. Button. The following will appear in the
display “CD mode”.
2. Open the CD door. “
OPEN ” will be shown on the display.
3. Place an audio CD/MP3 into the tray with the label side facing up.
4. Close the CD door. The total number of tracks will appear on the display after several
seconds and will playback.
5. Press the PLAY/PAUSE/SELECT/SCAN button to pause, the display flashing.
6. To release the pause, press again the PLAY/PAUSE/SELECT/SCAN button.
7. Press STOP/MENU button to stop playback completely.
Note:
 To ensure good system performance; wait until the disc tray completely reads the disc
before proceeding.
 The number of folders and the number of tracks will be shown with CDs in the MP3 format.
 If no disc is loaded into the compartment, or the disc is placed upside down, the display will
Press the MEM./P-MODE button. Then use the
4
2. Press / buttons to select unit “Manual tune” shown on the display. Then press
PLAY/PAUSE/SELECT/SCAN button to enter.
3. Use the / buttons to select the desired memory location. Then press
PLAY/PAUSE/SELECT/SCAN button to enter.
Note:
“System” in the MENU is used to reset the unit and check the software version.
“Prune” in the MENU is used to clear all the DAB stations memory.
RADIO OPERATION
Listen to FM radio broadcasts. Press the STANDBY/FUNC. button until the display reads FM
and the radio frequency
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
• Tune to a station by rotate the TUNING knob. The station frequency is shown on the display.
AUTO PRESET MEMORY / SCAN To scan for stations within reception range and save
them to preset memory automatically, press and hold the PLAY/PAUSE/SELECT/SCAN button.
After the unit is finished scanning, the unit will automatically tune to preset number 1 (P1).
Use the / buttons to select the desired memory location.
USING THE CD/MP3
Discs for Playback
This system can playback all digital audio CD/MP3/WMA discs, finalized digital audio
CD-Recordable (CD-R) discs and finalized digital audio CD-Rewritable (CD-RW) discs.
LOADING A DISC
1. Select the CD mode with STANDBY/FUNC. Button. The following will appear in the
display “CD mode”.
2. Open the CD door. “
OPEN ” will be shown on the display.
3. Place an audio CD/MP3 into the tray with the label side facing up.
4. Close the CD door. The total number of tracks will appear on the display after several
seconds and will playback.
5. Press the PLAY/PAUSE/SELECT/SCAN button to pause, the display flashing.
6. To release the pause, press again the PLAY/PAUSE/SELECT/SCAN button.
7. Press STOP/MENU button to stop playback completely.
Note:
 To ensure good system performance; wait until the disc tray completely reads the disc
before proceeding.
 The number of folders and the number of tracks will be shown with CDs in the MP3 format.
 If no disc is loaded into the compartment, or the disc is placed upside down, the display will
buttons to select the desired
memory location. Then press PLAY/PAUSE/SELECT/SCAN button to enter.

Trevi CMP 582 DAB Specifications

General

Brand	Trevi
Model	CMP 582 DAB
Category	Radio
Language	English