15
CMP 588 DAB
CD-MP3 PLAYER
PLAYING A DISC
1. Select the CD source. The "CD" will appear;
2. Open the CD compartment and insert the disc with the written side facing up. Close the door carefully;
3. After a few seconds the LCD display will show the number of tracks on the disc. Playback will start automatically;
4. Press ENTER/
(6) button on the unit or (27) button on the remote control to activate the pause; the elapsed
time of the track will begin to flash. Press it again to turn off the pause;
5. Press
(30) button on the remote control to stop playback permanently.
JUMP TRACE AND FORWARD/FAST BACK
1. Press or (2) button on the unit or the button (20), (29) on the remote control to move to the
previous or next track;
2. Press
or (2) button on the unit or the button (20), (29) on the remote control while listening to
send the track back or forward quickly. Release the button to return to normal playback.
REPEAT OF SINGLE TRACE
1. To play a single track continuously, press EQ/RPT (3) on the unit or RPT (18) button on remote control during
playback until "REP-1" appears on the display. The CD player will continuously play the track shown on the
display;
2. To cancel uninterrupted playback of the single track, press EQ/RPT (3) on the unit or RPT (18) button on remote
control several times until the "DISC" symbol appears.
DISK REPETITION
1. To continuously play all the tracks on the disc, press EQ/RPT (3) on the unit or RPT (18) button on remote control
during playback until "REP-ALL" appears on the display. The CD player will continuously play all the tracks on
the disc;
2. To cancel the uninterrupted playback of all tracks on the disc, press EQ/RPT (3) on the unit or RPT (18) button
on remote control repeatedly until the "DISC" symbol appears.
FOLDER REPEAT
NOTE: function valid only for MP3 CDs.
1. To play all tracks in a folder continuously, press EQ/RPT (3) on the unit or RPT (18) button on remote control
during playback until "REP-DIR" appears on the display. The CD player will continuously play all the tracks in
the folder;
2. To cancel the uninterrupted playback of all the tracks in the folder, pressEQ/RPT (3) on the unit or RPT (18)
button on remote control several times until the "DISC" symbol appears.
RANDOM FUNCTION
1. To randomly play all the tracks on the disc, press EQ/RPT (3) on the unit or RPT (18) button on remote control
during playback until "RANDOM" appears on the display. The CD player will randomly play all the tracks on the
disc;
2. To cancel random playback of all tracks on the disc, press EQ/RPT (3) on the unit or RPT (18) button on remote
control several times until the "DISC" symbol appears.
PROGRAM
You can select the order in which the tracks are played.
1. Press
(30) button on remote control to stop playback;
2. Press PROG (23) button on the remote control, the message P01 will appears on the display;
3. Select the tracks with button
or (2) button on unit or button (20) or (29) on the remote control;
4. Press PROG button (23) on the remote control;
5. Repeat steps 3 and 4 to store and play the tracks you want; for audio CDs a maximum of 20 tracks can be stored,
while for MP3 CDs a maximum of 99 tracks can be stored;
6. Press ENTER/
(6) button on the unit or press (27) button on the remote control to start playback;
7. Press
(30) button on the remote control twice to cancel the programming.
ENGLISH
To Next Page
Loading...
Need help?
General
Weight and Dimensions
