Trevi CMP570BT - CD;MP3 Disc Playback and Navigation

CMP 570 BT
10
ENGLISH
5. Turn off the radio by press the STANDBY button.
USING THE CD/MP3
DISCS FOR PLAYBACK
ThissystemcanplaybackalldigitalaudioCD,MP3,WMAnalizeddigitalaudioCD-
Recordable(CD-R)discs,nalizeddigitalaudioCD-Rewritable(CD-RW)discsand
CD-DA format digital audio CD/CD-R/CD-RW discs.
LOADING A DISC
1. Press the FUNCTION button to CD mode.
2. Press the CD DOOR OPEN/CLOSE to Open the CD door.
3. Place an audio CD/MP3 disc into the tray with the label side facing up.
4. Close the CD door.
The total number of tracks will appear on the display after several seconds.
5. To remove the CD/MP3 disc, press the CD DOOR OPEN/CLOSE to open CD com-
partment lid, grasp the CD/MP3 disc by its edges, and carefully take it out.
Note:
• Toensuregoodsystemperformance;waituntilthedisctraycompletelyreadsthe
disc before proceeding.
• Ifnodiscisloadedintothecompartment,orthediscisplacedupsidedown,the
display will show No.
PLAYING A DISC
1. The playback starts from track 1 automatically when reading the disc.
Topauseplayback,press/PAIRbutton.Thecurrenttrackwillashonthedisplay.
To resume playback, press /PAIR button again.
2. To stop playback, press STOP button and the display will show the total number
of tracks.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
• PresstheCDSKIP/SEARCHFORWARD/BACKWARDbuttonrepeatedlyinstop
mode or during playing until the desired track appears on the display.
• Pressthe/PAIRbuttontostartplay.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the CD SKIP/SEARCH FORWARD /BACKWARD button to scan the current
playing track at high speed until desired point passage, and then release the button.
ENGLISH