Playback will start again from this point.
To select a desired folder (for MP3 disc only)
(if the MP3 disc contains more than one folder)
Press and hold the FOLD.+/+10 or FOLD.-/-10 button to skip next/previous folder. Until
the desired folder number appears on the LCD display, then release the button,
To select a song which track number exceeds 10
To select a song/track which number exceeds 10, Press the FOLD.+/+10 or FOLD.-/-10
button each time to skip forward or backward 10 tracks, then press the or button
to select desired track. For example: to select the 17th track from the 1st track, press
FOLD.+/+10 button, and then press the button six times immediately.
PROGRAM TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks
/MP3 99 tracks can be stored in the memory in any order.
1. Instopmode,pressthePROG./-MODEbutton,the“PROGRAM”willashandthe
P01 indicator will be on.
2. PresstheCDSKIP/SEARCHFORWARDbuttontoselecttherstdesiredtrackto
be programmed.
3. Press the PROG./P-MODE button to enter. The display changes to show P02.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Pressthe/PAIRbuttontostartplaybackfromtherstprogrammedtrack.
6. Press the STOP button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the STOP button when the disc is stopped, or
2. Open the CD compartment lid, program will be erased.
REPEAT
To Repeat a Single Track
1. PressthePROG./P-MODEbuttononceinplaymode,“”willashonthedisplay.
The current track will be played repeatedly until the STOP button is pressed
2. To cancel repeat play press the PROG./P-MODE button until the “ ” disappear on
show.
To repeat all the Tracks
1. In playing mode press PROG./P-MODE button until the “ ” shows steady on the
display, all tracks on the disc will be played repeatedly until the STOP button is
pressed.
ENGLISH
To Next Page
Loading...