To Next Page

To Previous Page

DAB 7F90 R

position number);

- If the preset number is empty, “Preset Empty” is shown.

- If the position is saved with station, station frequency is shown.

2. Press > (4) or < (9) button to select the desired memory location;

3. PressSELECTbutton(3)oncetoconrmandsavetheselectedstation.

To listen to a present station:

- Press PRESET button (10) once;

- Press the > (4) or < (9) button for selecting your desired station;

-PressSELECTbutton(3)toconrm.

FM TRANSMISSION INFORMATION

In FM mode, the display will show information about the current radio

station.

1. Press the INFO/MENU button (8) to change the displayed information.

Note: Not all DAB stations provide the information displayed by the device.

RDS info: displays information about the song broadcast (artist, track

title, etc...).

PTY, Program Type: Displays information about the FM station.

Transmitter Name: displays information about the sender of the

service.

Time/Date: displays information relating to the hours and date of

the current transmission.

Number/ transmitter frequency: displays the transmission frequency.

Reception: displays whether the reception is Mono or Stereo.

DAB/DAB+ MODE

Auto Scan

1. Adjust the antenna extension and angle to have the best reception;

2. Press POWER button (12) to switch ON the unit;

3. Thersttimetheradioispoweredandswitchedon,itwillautomatically

select DAB mode and start a quick scan of the DAB channels to search

for available stations. Please leave it to complete this process;

4. Press > (4) or < (9) button to select desired station;

Note:

- You may have to wait for the unit to tune into the new channel.

- In DAB mode, the date and time of the device are synchronized with those

of the station being listened to.

5. Press SCAN button (5) can fully scan the available channels again.

ENGLISH

Trevi DAB 7F90 R User Manual

Questions and Answers: