Do you have a question about the Trevi FRS 1480R and is the answer not in the manual?
Frequency Response | 20 Hz - 20 kHz |
---|---|
Cable Length | 1.2 m |
Connector | 3.5 mm |
Impedance | 32 Ohm |
Type | On-ear |
Connect a 3.5mm stereo jack cable to the TV headphone socket. Optical input is disabled when audio cable is used.
Connect TV's digital optical output to the base's digital optical input. Optical input is disabled when audio cable is used.
Long press power key to turn on/off. Wait for pairing (approx. 20 seconds).
Adjust volume using Volume +/- buttons. Press MUTE to toggle mute.
Perform new pairing if hiss or connection failure occurs by pressing MUTE and pairing buttons.