Trevi RC 80D4 DAB - Page 14

RC 80D4 DAB
A) Full Scan – Automatically scan DAB stations
B) Manual Tune – manual tune
C) DRC – off, low, high
D) Prune – yes, no
E) TA - On, Off.
F) System –
1. Sleep – off, 15, 30, 45, 60, 90 (minutes)
2. Alarm - To set Alarm 1 and Alarm 2.
3. Time:
- Set Time/Date
- Auto update - Automatic update of date and time from source
or Off. It is advisable to keep it set to “Update from DAB” to avoid
continuous time shifts.
- Set 12/ 24 hour - Set AM/PM or 24 hour.
- Set date format - DD MM YYYY, MM DD YYYY
4. Backlight
- Timeout – On, 10, 20 30, 45, 60, 90, 120, 180,
- On level – high, medium, low
- Dim level – medium, low, high
5. Language – English, Deutsch, Italiano, Francais, Nederlands, Espanol, Dansk.
6. factory reset – No or Yes
7. SW version
FM Radio
1. Extend the antenna and reposition for better reception;
2. Press / Stand-by (1) button to turn On the unit;
3. Press MODE button (8) repeatedly and select FM mode.
Automatic storage:
4. Press and hold SNOOZE/ENTER/SCAN (7) for 2 seconds to start scanning and
automatic storage of the stations;
5. Press PRESET (3) button;
6. Press SELECT < (4) or SELECT > (5) button to select a stored radio station; press
SNOOZE/ENTER/SCAN (7) button to conrm.
Note: Auto scan sensitivity is adjustable in the Menu.
Manual search and storage:
1. Press and hold SELECT < (4) or SELECT > (5) button for a few seconds to tune to
the next or previous radio station;
2. To store a radio station:
- Move to the frequency to be memorized, press for a few seconds PRESET
button (3);
- To use SELECT < (4) or SELECT > (5) button to select the PRESET STORE
English