Trevi RC 80D6 DAB User Manual

RC 80D6 DAB
English
To keep the clock running and to store the time even during a temporary power
failure, insert two “AAA” batteries (not supplied) in the battery compartment (6) on
the bottom of the appliance following the polarity indications printed on the mobile.
Operation
Power On/Off-Standby:
1. Extend the telescopic antenna (8).
If the display does not show the time:
2. Press and hold for 3 seconds
/SOURCE (15) button;
If the display shows the time (Stand-by function):
3. Press
/SOURCE (15) button;
4. Press and hold
/SOURCE (15) button for 2 seconds to put the appliance in
Stand-by mode (the time and date are shown on the display);
5. Press and hold
/SOURCE (15) button for 2 seconds to completely switch off
the appliance (no display remains on the display).
Volume adjustment
Turn the VOLUME knob (2) to increase or decrease the volume.
Setting alarm
To set alarm 1 or 2, follow the next steps:
1. In radio mode, press the AL1 (11) or AL2 (16) button to enter the alarm settings
and conrm with the ENTER button (17);
2. Press the MEM-/SCAN- (12) or MEM +/SCAN+ (14) button to adjust the time and
conrm with the ENTER key (17);
3. Use the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button again to adjust the
minutes and conrm with the ENTER key (17);
4. Use the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button to select the duration
and conrm with the ENTER key (17);
5. Press the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button to select the type of
ringtone (FM, DAB or BUZZER) and conrm with the ENTER key (17);
6. Press the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button to select the fre
quency (once, daily, weekly, week-end only) and conrm with the ENTER key
(17);
7. Press the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button to adjust the volume
and conrm with the ENTER key (17);
8. Press the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button to activate or
deactivate the alarm and conrm with the ENTER key (17).
Turn off the alarm
To stop the alarm completely (ringtone or radio) press /SOURCE (15) button.
To stop the alarm sound, press the SNOOZE button (13); the interruption lasts 9
minutes, after which the alarm goes back on.

Trevi RC 80D6 DAB Specifications

General

Radio type	Portable
Tuner type	Analog & digital
Supported radio bands	DAB, DAB+, FM
Radio Data System (RDS)	Yes
RMS rated power	- W
Speaker type	1-way
Number of built-in speakers	1
Display type	LED
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Antenna type	External
MP3 playback	No
Product color	Black, Silver
Volume control	Rotary
Apple docking compatibility	Not supported
Power source	DC
AC input voltage	230 V
DC input voltage	5 V
AC input frequency	50 Hz
Clock mode	12h/24h
Package type	Box
Package depth	90 mm
Package width	200 mm
Package height	80 mm

Weight and Dimensions

Depth	63 mm
Width	155 mm
Height	79 mm