Trevi XF 3400 PRO - User Manual

Questions and Answers

K
Kristen ColeAug 10, 2025
What to do if my Trevi XF 3400 PRO Portable Speakers have no sound when power is on?
- G
  Gary HutchinsonAug 10, 2025
  If your Trevi Portable Speakers produce no sound when powered on, make sure an AUX signal is input, the volume isn't at its lowest, the voice switch is on, and a USB/SD card with MP3 files is properly inserted.
J
Jessica BlackAug 16, 2025
Why is the sound distorted on my Trevi XF 3400 PRO?
- E
  Erika RussoAug 16, 2025
  Distorted sound from your Trevi Portable Speakers can occur if the volume is too high. Try turning the volume down. Also, the audio file itself might be corrupted or have errors, so check and change the audio file.
M
Maria BrewerAug 22, 2025
What to do if my Trevi XF 3400 PRO won't charge or the battery life is short?
- J
  jimenezangelaAug 22, 2025
  If your Trevi Portable Speakers aren't charging or the battery life is short, first ensure the power cord is properly connected. If that doesn't work, the battery may not be fully charged; allow 6-8 hours for a full charge. Finally, the battery life may have ended, in which case you should replace it with a battery of the same specification.
R
Robert HansonAug 28, 2025
What to do if there is no sound from the microphone on my Trevi Portable Speakers?
- S
  Stanley WoodsAug 28, 2025
  If there is no sound from the microphone on your Trevi Portable Speakers, ensure the microphone is correctly plugged into the socket. Also, check that the microphone switch is turned on and that the microphone volume is adjusted to your desired level.
A
alexanderjoshuaSep 4, 2025
What to do if my Trevi XF 3400 PRO Portable Speakers have no sound after inserting a USB/SD Card?
- E
  Emily LoweSep 4, 2025
  If your Trevi Portable Speakers produce no sound after inserting a USB or SD card, ensure that the file format is MP3. Also, verify that the USB or SD card is correctly plugged in.