TREX TXA53 User Manual

A/B
Qty. Description
Step 1
A/B
Step 2
Model: TXA53
Note: pins can be removed for folding
Step 2
6/2/2011
Then insert pins
Insert (2) 2¼" bolts, washers and locknuts
into pre-drill holes
Assembly Instructions
Unfold chair assembly
B - 1/4 FLAT WASHER
2
ALL HARDWARE IS COATED STAINLESS STEEL
B - 1/4-20 NYLOCK NUT
2
A - 1/4-20 X 2-1/4 WAFER SHCS
2
Pin
2
Incorrect
Correct
Step 1
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
7/16 wrench
TOOLS NEEDED

TREX TXA53 Specifications

General

Brand	TREX
Model	TXA53
Category	Outdoor Furnishing
Language	English

Summary

Trex Outdoor Furniture Assembly Instructions TXA53

Step 1: Unfold Chair Assembly

Instructions for unfolding the chair assembly, including a visual guide showing correct and incorrect methods.

Step 2: Attach Components

Guidance on inserting bolts, washers, and locknuts into pre-drilled holes, followed by inserting pins for chair assembly.

Tools Needed for TXA53 Chair Assembly

Lists the required tools, including wrenches and hex keys, and the specific hardware (bolts, washers, nuts) for assembly.

Trex Outdoor Furniture Assembly Instructions

Step 1: Attach Feet to Legs

Instructions for attaching the feet to the legs of the table using 2 1/2" chair bolts.

Step 2: Attach Leg Assemblies to Table Top

Guidance on securing the leg assemblies to the table top using 2 1/2" screws.

Step 3: Attach Leg Braces and Umbrella Support

Instructions for attaching leg braces with 3" screws and the umbrella brace, including installing a 1 1/2" bolt.

Step 4: Final Tightening

Instructions to set the table upright and tighten all bolts securely.

Tools and Hardware for Table Assembly

Lists necessary tools like hex keys and specifies hardware components (screws, bolts, washers) for table assembly.