TRI-ARC U-DESIGN User Manual

2
3
1
50° LADDER
*INCLUDES LEG KIT
Crossover Bridge & Turn Platform
Assembly Instructions
*ASSEMBLY REQUIRES AT LEAST 4
PERSONS CAPABLE OF LIFTING 50 LB EACH.
Inspect all pieces for damage upon delivery.
Inspect delivery for missing parts. Report
damages and missing parts to your U-Design
vendor.
1.
75° LADDER
*INCLUDES LEG KIT
90° LADDER
2. If installing a Turn Platform, install Leg Kit and
Rail Kits per Leg Kit Assembly Instructions and
Rail Kit Assembly Instructions.
CROSSOVER BRIDGE
TURN PLATFORM
*INCLUDES LEG KIT & (2) RAIL KITS

TRI-ARC U-DESIGN Specifications

General

Brand	TRI-ARC
Model	U-DESIGN
Category	Ladders
Language	English

Summary

Crossover Bridge Assembly

Initial Inspection and Damage Report

Inspect all pieces for delivery damage and missing parts. Report issues to your vendor.

Turn Platform Assembly

Turn Platform Specific Installation

Install Leg Kit and Rail Kits per their respective assembly instructions if applicable.

Connecting Components and Final Tightening

Fastening Crossover Bridge and Turn Platform

Fasten adjacent parts using provided bolts, nuts, and washers. Do not fully tighten initially.

Leg Kit Requirement for Spans

A Leg Kit is required if any span exceeds 90 inches. Follow leg kit instructions.

Final Fastener Tightening

Ensure all fasteners are securely tightened before using the assembled product.