To Next Page
W
Wanda RodriguezAug 5, 2025
What to do if the marking is not legible (low contrast) on Tri-Star Measuring Instruments?
- MMadison MillerAug 5, 2025
If the marking from your Tri-Star Measuring Instruments is not legible, it could be due to a couple of reasons. First, the wire you're using might not be suitable for laser marking, so try using a different, laser-markable wire. Second, the laser power might be too low. In this case, you can try lowering the objective position or reducing the line spacing and marking speed. If these steps don't work, the laser may need to be sent back to the factory for repair.
General