Use only the correct Tri-Tronics charger to charge your
Remote Trainer. Using the wrong type of charger may damage
batteries or the unit itself. Do not charge batteries that are not
installed in a Remote Trainer. Note that you can charge two
collars or two transmitters (or one of each) at the same time
with one charger.
Charging Time
Charge your Remote Trainer for at least 14 hours. It's okay
to use your Remote Trainer before the 14 hours are up; it
will function normally. A 14-hour charge ensures full
battery capacity. You can leave your collar and transmitter on
charge when not in use, if you wish.
Storing a Remote Trainer
Before storing your Remote Trainer for an extended period,
charge it for 14 hours. Thereafter, charge every three months
while the unit is in storage, and charge for 14 hours before
first use.
Replacing the Batteries
Both the transmitter and collar have user-replaceable Nickel
Metal Hydride (NiMH) batteries. Proper battery care will
help ensure maximum life from your batteries. When your
batteries do need to be replaced, you can replace them
yourself with parts obtained from Tri-Tronics.
Don’t open your transmitter or receiver until after you have
received the replacement battery pack. Carefully read the
instructions. Only the battery compartments of your Remote
Trainer are user-accessible. Opening any other part of your
Remote Trainer could cause damage.
While Tr i - Tronics Remote Trainer batteries are user- re p l a c e a b l e ,
they are not intended to be “field replaceable.” Open battery
compartments only for the purpose of replacing a battery.
Open them away from the field to avoid contamination.
Please contact your local officials to find out whether any
special disposal requirements apply where you live.
Page 18 Remote Trainer
To Next Page
Loading...
