To Next PageTo Next Page
Need help?Do you have a question about the TRIANIUM Duranium Case for iPhone Xr and is the answer not in the manual?
General| Brand | TRIANIUM |
|---|---|
| Model | Duranium Case |
| Compatible Brand | Apple |
| Compatible Model | iPhone Xr |
| Color | Black |
| Type | Phone Case |
Begin by separating the backplate from the soft body of the case.
Remove all protective film from the case before proceeding with installation.
Starting from a corner, remove the soft TPU casing from the cover piece.
Place the phone into the cover piece with the screen facing the transparent window.
Join the soft casing and cover back together, ensuring ports and buttons align.
Press around sides and corners to ensure the case is completely sealed.
Insert the backplate into the case, starting from the bottom.
Complete by attaching the top two corners of the backplate to the soft case.
Begin by separating the backplate from the soft body of the case.
Gently pull away the rubber lip from the top piece of the case.
Slowly separate the two pieces of the case to remove the iPhone.
Join the soft casing and cover back together, ensuring ports and buttons align.
Slide the phone into the holster with the screen facing inward to prevent scratches.
Snap the other side of the case into the holster until it locks securely.
Pull the holster's release tab while gently pulling the case away.
Hold the clip open, slide the locking mechanism to engage for easy viewing.
