Triax UFO 150 - User Manual

Questions and Answers

M
Matthew JohnsonAug 11, 2025
How to fix a weak signal on my Triax Radio Antenna?
- L
  Lisa RiveraAug 11, 2025
  A weak or missing signal in your Triax Radio Antenna is often due to a short or missing connection in the coax cable or connectors. To troubleshoot, remove the cable from the PSU/power inserter. If the LED lights up, there's a short in the cable; repair or replace it. If the LED lights up on the PSU but not on the antenna, there might be a missing connection; repair or replace the cable and/or connectors. If the LED remains off, replace the PSU/power inserter.
B
bradmillerAug 19, 2025
Why is there interference with my Triax Radio Antenna?
- W
  Wanda MillerAug 19, 2025
  Interference with the Triax Radio Antenna is often due to electronic devices like mobile phones, computers, tablets, or transmitters nearby. Try moving these devices further away or raising the antenna's height to enhance signal reception.
G
Grant KerrAug 26, 2025
What to do if I experience pixelation and missing audio with my Triax UFO 150 Radio Antenna?
- M
  Michael GonzalezAug 26, 2025
  Pixelation and missing audio with your Triax Radio Antenna are often caused by nearby electronic devices such as mobile phones, computers, tablets, or transmitters. Increase the distance between these devices and the antenna. You can also try increasing the height of the antenna to improve signal reception.
K
Kevin FernandezSep 2, 2025
What causes ghosting (double pictures) with Triax UFO 150?
- D
  diane25Sep 2, 2025
  Ghosting (double pictures) on your Triax Radio Antenna (analog signal only) is caused by the TV signal reflecting off buildings or large ships. Changing the antenna's position by a few meters will often resolve this issue.

Triax UFO 150 Specifications

General

Brand	Triax
Model	UFO 150
Category	Radio Antenna
Language	English

Triax UFO 150 - User Manual

Table of Contents

Questions and Answers

Triax UFO 150 Specifications