User Manual
What's in the box
Ear Tips (S, M, L)
Ear Hooks (S, M, L)
Cable Clip
Travel Pou ch
Micr o USB Cable
User Manual
Overview-buttons & indicators
Ear hook
Ear tip
Indicator Light
Volume +
Multifunction Button
(MFB)
Volume -
Specially-designed earbuds for exceptional comfort, fit, and sound.
(Locate the point of hook to
align with the wire)
Power on/off
Press and hold MFB button for 4 seconds until the
red indicator flashes 1 second. The headphones will
power off .
Function
Opera tion
Sound
Power on
Power off
Press and hold MFB button for 2 seconds until the
indicator flashes blue for 1 second
bee p sou nd pr om pt
bee p sou nd pr om pt
Note:
The indicator will flash blue twice every 5 seconds, when the headphones are in
standby mode (not paired with devices).
The headphones will automatica lly power off if unpaired for more than 5 minutes.
1. Keep your head phones turned off and within 1 meter of your phone.
2. Press and hold MFB button for 5 second s until the indicator lights flash red and blue,
and heard the bee p sound prompting will indicate pairing mode has been activa ted.
3. Activate the Bluetooth function on your Bluetooth-ena bled devi ce.
4. Select the pro file name Tribit XFree Color fro m the list of Bluetooth devices found by
your device and connect (input pair ing code 0000 if needs).
5. Heard the beep sound prompting and indicator lights flash blue will indicate that
pairin g has been successful and the hea dphones are now connected.
Notes:
The headphones will automatically connect with the device they were paired with the last
time when you turned it on.
If the pairing is unsuccessful, turn off the headphones and repeat the steps above to try again.
The indicator light will flash blue once every 7 seconds when the headphones are paired
with a device or playing music.
Function
Status of headphones Operation
Volume up
Playing music
Press V+ button
Volume down Press V- button
Playing music
Playing music
Last track Press and hold V+ button for 2 seconds
Playin g music
Next track Press and hold V- button for 2 seconds
Play
Music pause d
Press MFB button
Pause
Press MFB button
Playing mus ic
Hands Free Calling
Function
Status of headphones Operation
Answer call
Incoming call
Press MFB button once
End call
During a call
Press MFB button once
Reject call Incoming call
Press and hold MFB button for 2 seconds
Redial last phone
number
Standby mode
(already paired)
Double press MFB button
Voice dialing
Standby mode
(already paired)
Press MFB and V+ button simultaneously
for 1s.(MFB button must be pressed first)
Answer and
transferring two calls
During a call
Call transferring
between headphones
and phone
During a call
Double press MFB button
Volume up
During a call
PressV+ button
Volume down
During a call
Press V- button
Press and hold MFB button for 2 seconds
to answer and end a call
Press MFB button to transferring calls
Notes:
When dialing a call, the indicator will flash blue twice every 3s.
When receiving an incoming call,the indicator will quick flash blue
When in a call, the indicator will flash blue once every 3s
When battery is low, the indicator will flash red and beep sound prompt every 60s . Charge
the Bluetooth headphones as required.
1. Connect micro cable to the micro USB-port on the headphone control tab, and a compatible
USB dock or adapter.
2. The indicator light will glow red to indicate charging.
3. When the headphones are fully charged, the indicator light will change from red to blue.
Note:
The Bluetooth Headphones require a charging input voltage of 5V, higher
input voltage or the use of quick charge adapters with higher voltage output may
damage your headphones.
The headphones must be fully charged prior to first-time use.
When connected to an IOS device, the remaining battery of the headphones will be displayed
on the IOS device.
XFree Color
In standby mode, press the V+ button and V- button simultaneously for 5 seconds to reset to
default settings. The indicator will flash blue 1s and then enter pairing mode will flash red and
blue lights.
1. I can't turn on my Headphone.
Ensure the Headphone are fully charged before use, the device will not turn on if battery is
very low.
2. I can't find the Headphone on my device.
Check that the Headphone are in pairing mode and the LED indicator is flashing blue
and red.
Make sure your Bluetooth device is close to the Headphone within 3 feet.
Turn off the Headphone and the Bluetooth device, then turn on the Headphone and
then restart Bluetooth device. Then retry the pairing method.
Reset your Headphone and try again.
3. I can find the Headphone on the Bluetooth device list but can't successfully
connect them.
Disconnect your Bluetooth device from any previously connected devices. Restart the
Bluetooth device and retry connecting the Headphone.
Remove the Headphone from Bluetooth device list and pairing again.
Reset your Headphone and try again.
Make sure the Headphone have been successfully paired with your device.
Make sure the Bluetooth device is playing music/audio.
Make sure the volume is not too low or mute on both your Headphone and the
Bluetooth device.
Reset your Headphone and try again.
Some phones do not have the full stereo music function, check by connecting to
another cellphone to test the Headphone.
5. After pairing, the sound is not very clear/the caller cannot hear my voiceclearly
and cuts out intermittently.
Please adjust the volume on your Bluetooth device and Headphone.
Units are out of range (within10meters), Bring units closer together.
Make sure there is no interference source (electrical or magnetic) nearby.
Recharge your headphone, the power may be too low.
4. After pairing, there is no sound in Headphone when playing music or answering call.
6. The Bluetooth Device ask for a password/pin while pairing
Most Bluetooth devices don't require a password / pin during pairing, but enter ”0000”
(four zeros) if asked
Spec ifica tions
Bluetooth version Bluetooth V4.1
Bluetooth profile
HFP, HSP, A2DP, AVRCP
Input
DC 5V / 0.5A
Charging time
about 2h
Working time
10h
Standby time
400h
Weight 14g
Mic ro USB
Installing & Wearing
Playback
Pairin g Your Headphones
FAQs and Solutions
Reset
Charging the headphones
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Statement
Wireless Headphones XFree Color
V1.0.0
User Manu al
Wireless Headphones XFree Color
To Next Page
Need help?
General