TRICKSTUFF® GMBH
SCHWABENMATTEN 17A
79292 PFAFFENWEILER
GERMANY
TECH-SUPPORT@TRICKSTUFF.DE SERVICE MANUAL – DIRETTISSIMA/MAXIMA PUMP V2024_02. PAGE 27 OF 27
3. Install the brake hose with its fitting back to the freshly serviced brake pump. Use an
8mm open-end wrench and 4-6Nm of torque to finish the installation.
4. Bleed the brake system according to the respective manual and mount it back on your
bike
Technical changes, errors and misprints excepted.
To Previous Page
Loading...