TRICKSTUFF® GMBH
SCHWABENMATTEN 17A
79292 PFAFFENWEILER
GERMANY
TECH-SUPPORT@TRICKSTUFF.DE SERVICE MANUAL – PICCOLA PUMP V2024_02. PAGE 24 OF 25
9. Install the pivot bolts using a TX15 key. New bolts are precoated with medium strength thread
locker. If you remount previously used bolts, apply medium strength thread locker (e.g. Loctite
243) and torque to 1Nm.
Note: Apply thread locker to the inner threads, as shown in the picture below. This way you
avoid fixing the bearings to the pivot bolts.
To Next Page
Loading...