TRICKSTUFF® GMBH
SCHWABENMATTEN 17A
79292 PFAFFENWEILER
GERMANY
TECH-SUPPORT@TRICKSTUFF.DE SERVICE MANUAL – PICCOLA PUMP V2024_02. PAGE 25 OF 25
10. Before installing the fittings back on the brake pump, replace both O-rings of the banjo fitting
(one per side). Use a TX25 key and 3Nm to finish the installation.
11. Bleed the brake system according to the respective manual and mount it back on your bike
Technical changes, errors and misprints excepted.