Trident A-RANGE Owners Manual6
Trident A-RANGE Trouble Shooting
No Power
Ensure the unit is selected for the correct mains voltage via the selector incorporated in the
mains inlet socket on the back of the unit. Check the fuse (also in the mains inlet socket) if the
unit has been powered with the wrong voltage.
Check there is a mains supply reaching the unit.
The microphone doesn’t work
Is it connected to the correct input on the back of the unit?
Is the ‘+48V’ phantom power switched on (for condenser microphones)?
Is the input selected to Mic (‘LINE’ switch not depressed)?
Make sure the ‘Input Level’ rotary switch is turned up.
The line input doesn’t work
Is it connected to the correct input on the back of the unit?
Is the input selected to ‘LINE’ (LED illuminated)?
Make sure the ‘Input Level’ rotary switch is set to ‘0’.
The equaliser doesn’t work
Is the ‘EQ’ switch selected to ‘IN’ (LED illuminated)?
To Next Page
Loading...
