Trimble EZ-Guide 500 Quick Reference Card

EZ-Guide
®
500 Lightbar Guidance System
Quick Reference Card
www.EZ-Guide.com
EZ-Guide
®
500 Lightbar Guidance System
Quick Reference Card
www.EZ-Guide.com
EZ-Guide
®
500 Lightbar Guidance System
Quick Reference Card
www.EZ-Guide.com
CONNECTING THE SYSTEM
LABEL
LABEL
LABEL
EZ-Guide
To power
Function buttons
These buttons perform the
functions indicated by the icons.
Tip bar
Provides information on
how to use the system.
Power cable
(P/N 62817)
Offline guidance LEDs
When the vehicle is online, the center three green LEDs are lit.
When it is offline, the lit LEDs move to the side.
C
Keep the lightbar dry. Moisture may cause electrical damage and will void the warranty.
Standard system
LIGHTBAR LAYOUT
Vehicle icon
Shows the vehicle position and heading
relative to the current swath.
Buttons:
o u D
The arrow key highlights an icon
and the
o
button selects it.
Coverage logging and overlap
Coverage is displayed when a spray
switch is on, when the coverage
function button is enabled, or
when an autosteering system is
engaged.
ESC button (back of unit)
Cancels changes and moves
up one level.
Swath lines
The current swath is red. Adjacent
swaths are blue. Swath numbers
are displayed at the bottom of the
screen.
To
power
To
power
With EZ-Steer
®
system
With keypad
Antenna cable
(P/N 50449)
Ag15 antenna
EZ-Guide
®
500 lightbar
EZ-Guide
®
500 Lightbar Guidance System
Quick Reference Card
www.EZ-Guide.com

Trimble EZ-Guide 500 Specifications

General

Update Rate	5 Hz
Power Supply	12-24 VDC
Display Type	Color LCD
GPS Receiver	Integrated
Ports	Serial, USB
Operating Temperature	-20°C to +60°C
Weight	1.25 lbs
Memory	Internal storage
DGPS Accuracy	6-8 inches (15-20 cm) pass-to-pass