Need help?Do you have a question about the Trimble EZ-Guide 250 and is the answer not in the manual?
Overview of the EZ-Guide 250 system and its key features, including legal notices.
Details the standard components included with the EZ-Guide 250 lightbar and its parts.
Explains the function of the lightbar's buttons and icons for operation.
Provides instructions for installing the GPS antenna on the vehicle.
Procedure for powering on the EZ-Guide 250 lightbar.
Guides the user through the initial setup process upon first startup.
Details all elements displayed on the main guidance screen.
Describes the two available map views: Perspective and Plan map views.
Step-by-step instructions to switch between Easy and Advanced modes.
Explains onscreen lines, AB Lines, and basic guidance concepts.
Describes the simplest guidance pattern for parallel straight-line driving.
How the adaptive curve pattern updates guidance based on driver deviations.
Advanced pattern for creating guidance lines of any shape in a field.
How to reset guidance, create a new field, or select an existing one.
Steps to create a new field using the New Field wizard process.
Explains GPS correction types like WAAS and EGNOS to improve accuracy.
Information on compatible and incompatible USB drives for data transfer.
How to import data from a USB drive into the lightbar system.
How to export field data from the lightbar to a USB drive.
How to save current system configuration settings to memory or USB.
Explains the ability to map point, line, and area features in the field.
Ways to delete mapped features, either individually or all in a field.
Overview of the EZ-Guide 250 system and its key features, including legal notices.
Details the standard components included with the EZ-Guide 250 lightbar and its parts.
Explains the function of the lightbar's buttons and icons for operation.
Provides instructions for installing the GPS antenna on the vehicle.
Procedure for powering on the EZ-Guide 250 lightbar.
Guides the user through the initial setup process upon first startup.
Details all elements displayed on the main guidance screen.
Describes the two available map views: Perspective and Plan map views.
Step-by-step instructions to switch between Easy and Advanced modes.
Explains onscreen lines, AB Lines, and basic guidance concepts.
Describes the simplest guidance pattern for parallel straight-line driving.
How the adaptive curve pattern updates guidance based on driver deviations.
Advanced pattern for creating guidance lines of any shape in a field.
How to reset guidance, create a new field, or select an existing one.
Steps to create a new field using the New Field wizard process.
Explains GPS correction types like WAAS and EGNOS to improve accuracy.
Information on compatible and incompatible USB drives for data transfer.
How to import data from a USB drive into the lightbar system.
How to export field data from the lightbar to a USB drive.
How to save current system configuration settings to memory or USB.
Explains the ability to map point, line, and area features in the field.
Ways to delete mapped features, either individually or all in a field.
General| Display Size | 4.3 inch |
|---|---|
| Update Rate | 5 Hz |
| GNSS Support | GPS |
| Receiver Type | GPS |
| Guidance Modes | AB Line, Pivot |
| Operating System | Proprietary |
| Guidance Accuracy | 6-8 inches with ব্যভার করা correction |
| Accuracy | 6-8 inches pass-to-pass (with ব্যভার করা correction) |
To Next Page