Trimble EZ-Guide 250 User Manual

Getting Started
Quick Start Wizard
When you turn on the lightbar the Welcome to EZ−Guide screen appears automatically:
Press . The Quick Start Wizard appears.
The wizard has several setup screens that enable you to configure important settings before you begin driving.
During the Quick Start Wizard, you can press the function button to exit at any point. The system uses any
settings you have entered; for any settings that you have not yet entered, the system uses the settings from last
time.
The first time that you run the lightbar, complete the whole wizard.
ITEM DESCRIPTION
1 Quit wizard
2 Built−in help
3 Skip the wizard and begin driving
12

Trimble EZ-Guide 250 Specifications

General

Display Size	4.3 inch
Update Rate	5 Hz
GNSS Support	GPS
Receiver Type	GPS
Guidance Modes	AB Line, Pivot
Operating System	Proprietary
Guidance Accuracy	6-8 inches with ব্যভার করা correction
Accuracy	6-8 inches pass-to-pass (with ব্যভার করা correction)