Trimble GeoExplorer 6000 series User Manual

GeoExplorer 6000 Series User Guide 11
Safety Information
SAR information on this device is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid; search on FCC IDs:
• JUP 615 - for the GeoExplorer 6000 series standard edition handhelds
• JUP 616 - for the GeoExplorer 6000 series 3.5G edition handhelds
AC adaptor safety
To charge the handheld’s battery, use the international adaptor kit provided with the
GeoExplorer 6000 series handheld (see Powering the handheld, page 25).
C
WARNING – To use AC adaptors safely:
– Use only the AC adaptor intended for the GeoExplorer 6000 series handheld. Using any
other AC adaptor can damage the handheld and may void your warranty. Do not use
the AC adaptor with any other product.
– Make certain that the input voltage on the adaptor matches the voltage and frequency
in your location.
– Make certain that the adaptor has prongs compatible with your outlets.
– Do not use the AC adaptor in wet outdoor areas; it is designed for indoor use only.
– Unplug the AC adaptor from power when not in use.
– Do not short the output connector.
– Be aware that there are no user-serviceable parts in this product.
– If the AC adaptor becomes damaged, replace it with a new Trimble AC adaptor.
Electrostatic discharge
C
WARNING – Static electricity can harm electronic components inside your handheld. To
prevent static damage:
– Discharge static electricity from your body before you touch any of the electronic
components inside your device, such as a memory module. You can do so by touching an
unpainted metal surface.
The GeoExplorer 6000 series is designed for outdoor conditions; however
under conditions of low humidity extremely high voltage discharge events
are possible. Users are advised that the risk of causing discharge to
sensitive electronics can be minimised by avoiding finger contact to the
recessed connectors at the sides of the unit.
Battery safety
The removable rechargeable Lithium-ion battery is supplied partially charged. Charge
the battery completely before using it for the first time (see Powering the handheld,
page 25). If the battery has been stored for longer than six months, charge it before use.
C
WARNING – Do not damage the rechargeable Lithium-ion battery. A damaged battery
can cause an explosion or fire, and can result in personal injury and/or property damage.
To prevent injury or damage:
– Do not use or charge the battery if it appears to be damaged. Signs of damage include,

Trimble GeoExplorer 6000 series Specifications

General

Brand	Trimble
Model	GeoExplorer 6000 series
Category	Handhelds
Language	English