Trimble Nomad - User Manual

Check the package contents
Remove the unit and all accessories from the box. Confi rm that you have all of
the items listed below. Your confi guration may include additional items.
Install and charge the battery
5. Using the Philips screwdriver end of
the stylus, secure the battery door
6. Plug the charger into power strip or
wall outlet.
3. Charger with outlet adaptor correctly
installed
4. Insert the battery in the battery com-
partment on the back of the Nomad
1. Select the appropriate outlet
adapter for the AC adapter (charger)
2. Connect the outlet adapter to
the charger
➊
➋
➌
➍ ➎
➏
➐
➒
1. Nomad handheld computer
2. Battery and battery door
3. AC adapter (charger)
4. Hand strap
5. USB cable
6. Stylus
7. Lanyard
8. Screen protectors
9. Getting Started Guide (manual)
10. Getting Started CD
STEP 3
Power on and boot to Windows
1. Press the power button and allow the
Nomad to boot to Windows.
2. The fi rst time you boot up the Nomad, you
will need to align the touchscreen. You
will also have the option of setting up a
password. If you set a password, be sure
it is one you will remember.
STEP 4
Attach the hand strap and screen protector
1. Attach one end of the hand strap
to the hook near the bottom of
the back of the Nomad.
2. Stretch the hand strap toward
the top end of the unit and at-
tach it to the hook near the top.
3. Install the screen protector. Peel
the backing and place the screen
protector over the touchscreen.
Slide the edges of the screen
protector under the bezel to ensure
best fi t. Smooth with the enclosed
installation card if needed to remove
air bubbles.
7. Plug the barrel end of the charger
into the power port on the bottom of
the Nomad.
8. Charge the battery until the battery
LED is green
➓
Tr i m b l e N o m a d Orientation Guide
Important!
Be sure to charge the battery
fully (about 4.5 hours) before
operating the unit.
Start here!
STEP 1
STEP 2
➑

Summary

Check Package Contents

Install and Charge Battery

Battery Installation and Charging Procedure

Steps for installing the battery, connecting the charger, and charging until the LED is green.

Attach Hand Strap and Screen Protector

Hand Strap and Screen Protector Attachment

Guide for attaching the hand strap to the unit and installing the screen protector.

Power On and Boot to Windows

Initial Power-On and Touchscreen Alignment

Instructions for powering on the device for the first time and aligning the touchscreen.

Device Orientation and Keypads

Front View PDA Keypad Layout

Diagram and labels for the PDA-style keypad layout on the front of the device.

Front View Numeric Keypad Layout

Diagram and labels for the numeric keypad layout on the front of the device.

Back View Overview

Illustration of the back of the Trimble Nomad, showing battery door and notification LED.

Expansion Ports Usage

SD and CF Expansion Slot Access

Instructions for accessing and inserting cards into the SD and CF expansion slots.

USB and Serial Boot Ports

Identification of USB and serial ports for booting and connectivity.

Trimble Nomad Specifications

General

Operating System	Windows Mobile 6.1
RAM	128 MB
GPS	Integrated SiRFstar III GPS receiver
Display	3.5 inch, 240 x 320 pixel, TFT, color, touchscreen
Connectivity	Bluetooth 2.0
Ruggedness	IP67
Drop Specification	1.2 m (4 ft) to concrete
Expansion Slots	SD card slot