Juno T41
User Manual
42
carrier technical support.
6. You can also manually change modem settings by tapping >
Settings > Connections > Connections.
7. NOTE: Once connected, G (GPRS) or E (EDGE - a faster form of
GPRS) or H (HSDPA) will automatically appear in the notification
bar depending on the network capabilities in that area; some
service providers may only provide GPRS.
Removing cellular data settings
1. Tap > CellStart.
2. Tap Refresh to see the current list of configurations.
3. Select the configured data setting you wish to remove.
4. Tap Remove and OK.
NOTE: After removing a default configuration, the top setting will become
the new default.
To access the detailed settings for each configuration, tap Menu > Open
Connections Applet to change the modem connections.
5.6 Customizing your phone
Tap > Settings > Personal > Phone. The SIM card must be installed
and the phone turned on to view the settings.
Sounds: Tap to make changes.
Phone Number: The SIM card phone number is displayed.
Ring type, Ring tone and Keypad sounds: Choose the
sounds you want for text messaging notifications.
Security: A PIN can be set or changed to block unauthorized access to your
phone connection.
Services: Settings can be changed for Call Barring, Caller ID, Call
Forwarding, Call Waiting, Fixed Dialing and Voicemail and Text Messages.
Network: Find and set your preferred networks.
Version: View the RIL, MUX, RHA and AUD versions, as well as the
Manufacturer, Model and Revision number of the WWAN module.
Info: Information about your phone hardware ID number, current signal
strength, cell tower ID number and more.
To Next Page
Loading...
