Trimble Juno T41 - Page 73

Juno T41
User Manual
61
NOTE: If the current GPS time is not available (due to lack of GPS
signal), the Device Date-Time is used.
Stamp Settings:
 EXIF: Store the date-time information as EXIF data.
 EXIF & Stamp: Store the date-time information as EXIF data and
embedded on the visible image.
 Off: Do not store date-time information.
 GPS
Format:
 Deg/Min/Sec: Format in Degrees, Minutes, Seconds.
 Decimal Degree: Format in Degrees with decimal precision.
Stamp Settings:
 EXIF: Store the location information as EXIF data.
 EXIF & Stamp: Store the location information as EXIF data and
embedded on the visible image.
 Off: Do not store date-time information.
APP Settings ( )
Tap on the APP Settings icon to display a sub menu with the options
described below.
 UI Orientation
 Rotation on Tilt: Enable the automatic rotation of the camera
user interface based on device orientation/tilt.
 Fixed Landscape: Lock the camera application in landscape mode.
 Fixed Portrait: Lock the camera application in portrait mode.
NOTE: This option only applies to the image capture and does not
apply to video capture, which is only available in fixed landscape
mode.
 Sounds
 Enable: This option enables the beep sound while focusing and
click sound for capturing the images.
 Disable: This option disables the sound while focusing and
capturing the images.