Customizing your phone
Tap / Settings / Personal / Phone. The SIM card must be
installed and the phone turned on to view the settings.
Sounds: Tap to make changes.
- Phone Number: The SIM card phone number is displayed.
- Ring type, Ring tone and Keypad sounds: Choose the sounds
you want for text messaging notifications.
Security: A PIN can be set or changed to block unauthorized access
to your data connection.
Services: This unit is data-only and dialing controls are not
available. Settings can be changed for Call Barring, Caller ID,
Call Forwarding, Call Waiting, Fixed Dialing and Voicemail
and Text Messages.
Network: Find and set your preferred networks.
Version: View the RIL, MUX, RHA and AUD versions, as well as
the manufacturer, model and revisions number of the WWAN
module.
Info: Find and set your preferred networks.
- IMEI: The unique number that identifies the phone module that
is embedded in the unit. (If you purchase a SIM card
separately, the phone service provider may want your IMEI
number. It is located on this screen as well as in the battery
compartment.
- IMSI and ICCID: Unique numbers embedded on the SIM card.
- Signal Strength, Cell ID, Location Code and Network Code
are also listed under the info tab.
Band: Leave all the settings selected unless there is a good reason
to make adjustments.
Browsing the Internet
Tap / Internet Explorer, and enter the address of one of
your favorite web sites.
Internet Sharing
The Internet service from your unit can be shared with a
computer. Tap / Internet Sharing. You can connect either
through USB or Bluetooth.
To Next Page
Loading...