Trimble Yuma 2 - Adjusting Hotkey Settings

2-9
Operating Your Tablet Computer
To adjust screen timeout and transparency
1. Open the Hotkey Conguration Tool.
2. On the General tab, do the following:
• Slide the Timeout bar to the left or right to decrease or increase the
Function key screen timeout (in seconds).
• Slide the Transparency bar to the left or right to adjust the Function
key screen transparency.
3. Tap Apply to apply changes.
To congure the hotkeys
1. Open the Hotkey Conguration Tool.
2. Tap one of the following tabs:
• Setting Default: To congure the main level hotkeys ▲, ▼, ◄, ►,
F1, F2, F3 on the control panel.
• Setting A: To congure the rst level hotkeys. First level hotkeys refer
to hotkey combination Fn + ▲ / ▼ / ◄ / ► / F1 / F2 / F3.
• Setting B: To congure the second level hotkeys. Second level hotkeys
refer to hotkey combination Fn + Fn + ▲ / ▼ / ◄ / ► / F1 / F2 / F3.
• Setting C: To congure the third level hotkeys. Third level hotkeys refer
to hotkey combination Fn + Fn + Fn + ▲ / ▼ / ◄ / ► / F1 / F2 / F3.